document number: 34030 for tec hnical questions, contact: magnetics@vishay.com www.vishay.com revision: 08-jul-09 1 inductors, commercial, molded, axial leaded im vishay dale electrical specifications inductance tolerance: 1 %, 3 %, 5 %, 10 %, 20 %, oter tolerances available on request insulation resistance: 1000 m minimum per mil-std-202, method 302, test condition b dielectric strength: per mil-std-202, method 301: 1000 v ac for im-2, im-4, im-6, im-8, im-9 and im-10 200 v ac for im-1 test equipment (1) ? h/p 4342a q-meter ? measurements corporation megacycle meter, model 59 ? wheatstone bridge note (1) test procedure per mil-prf-15305 material specifications encapsulant: epoxy standard terminals: im-1 and im-2: 24 awg; im-4, im-6 and im-9: 22 awg; im-8: 21 awg; im-10: 20 awg, tinned copper features ? wide inductance range in small package ? flame retardant coating ? precision performance, ex cellent reliability, study construction ? epoxy molded construction provides superior moisture protection ? compliant to rohs directive 2002/95/ec mechanical specifications terminal strength: per mil-std-202, method 211, test condition a: for im-1, 3 lb pu ll; for im-2, im-4, im-6, im-8, im-9 and im-10, 5 lb pull and twist weight: im-1 = 0.25 g max., im-2 = 0.30 g max., im-4 = 0.65 g max., im-6 = 0.95 g max., im-8 = 1.5 g max., im-9 = 2.0 g max., im-10 = 2.5 g max. environmental performance test conditions specifications barometric pressure c mil-std-202, meth. 105 thermal shock a-1 mil-std-202, meth. 107 flammability - mil-std-202, meth. 111 overload - mil-prf-15305 low temperature storage - mil-prf-15305 resistance to soldering heat a mil-std-202, meth. 210 resistance to solvents - mil-std-202, meth. 215 inductance range and military standard model inductance range (h) min. max. im-1 0.10 100 im-2 0.022 0.082 0.10 1 1.2 27 33 1000 im-4 0.15 4.7 5.6 33 36 240 270 1800 im-6 0.10 2.7 3.3 27 33 220 270 1000 im-8 1100 3600 im-9 68 150 im-10 3900 10 000 dimensions in inches [millimeters] model a (dia.) b c (typ.) d (dia.) im-1 max. 0.086 [2.18] 0.210 [5.33] 1.62 [41.15] 0.0215 [0.546] min. 0.070 [1.78] 0.190 [4.83] 1.38 [35.05] 0.0185 [0.470] im-2 max. 0.105 [2.67] 0.260 [6.60] 1.63 [41.40] 0.0215 [0.546] min. 0.085 [2.16] 0.240 [6.10] 1.25 [31.75] 0.0185 [0.470] im-4 max. 0.165 [4.19] 0.385 [9.78] 1.63 [41.40] 0.027 [0.686] min. 0.145 [3.68] 0.365 [9.27] 1.25 [31.75] 0.023 [0.584] im-6 max. 0.200 [5.08] 0.450 [11.43] 1.63 [41.40] 0.027 [0.686] min. 0.180 [4.57] 0.430 [10.92] 1.25 [31.75] 0.023 [0.584] im-8 max. 0.225 [5.72] 0.570 [14.48] 1.63 [41.40] 0.030 [0.762] min. 0.205 [5.21] 0.550 [13.97] 1.25 [31.75] 0.026 [0.660] im-9 max. 0.260 [6.60] 0.570 [14.48] 1.63 [41.40] 0.027 [0.686] min. 0.240 [6.10] 0.550 [13.97] 1.25 [31.75] 0.023 [0.584] im-10 max. 0.250 [6.35] 0.750 [19.05] 1.63 [41.40] 0.034 [0.864] min. 0.230 [5.84] 0.730 [18.54] 1.25 [31.75] 0.030 [0.762] b c typ. a dia. d dia.
www.vishay.com for technical questions, contact: magnetics@vishay.com document number: 34030 2 revision: 08-jul-09 im vishay dale inductors, commercial, molded, axial leaded standard electrical specifications model ind. (h) tol. (%) q min. test frequency q (mhz) srf min. (mhz) (1) dcr max. ( ) rated dc current (ma) (2) im-1 0.10 10 35 25.0 680.0 0.13 895 phenolic core im-1 0.12 10 35 25.0 650.0 0.15 835 im-1 0.15 10 35 25.0 560.0 0.18 760 im-1 0.18 10 35 25.0 540.0 0.21 705 im-1 0.22 10 30 25.0 500.0 0.25 645 im-1 0.27 10 30 25.0 440.0 0.38 525 im-1 0.33 10 25 25.0 410.0 0.49 460 im-1 0.39 10 25 25.0 380.0 0.59 420 im-1 0.47 10 25 25.0 340.0 0.62 410 im-1 0.56 10 40 25.0 250.0 0.18 510 iron core im-1 0.68 10 40 25.0 215.0 0.20 485 im-1 0.82 10 40 25.0 200.0 0.22 465 im-1 1.0 10 40 25.0 190.0 0.25 435 im-1 1.2 10 35 7.9 170.0 0.28 410 im-1 1.5 10 40 7.9 150.0 0.49 310 im-1 1.8 10 40 7.9 135.0 0.56 290 im-1 2.2 10 45 7.9 130.0 0.72 257 im-1 2.7 10 45 7.9 110.0 0.85 236 im-1 3.3 10 45 7.9 100.0 1.2 198 im-1 3.9 10 50 7.9 95.0 1.5 178 im-1 4.7 10 55 7.9 88.0 2.1 150 im-1 5.6 10 55 7.9 78.0 2.8 130 im-1 6.8 10 55 7.9 69.0 3.2 122 im-1 8.2 10 45 7.9 52.0 4.4 104 im-1 10.0 10 45 7.9 47.0 5.2 95 im-1 12.0 10 40 2.5 31.0 3.0 126 im-1 15.0 10 40 2.5 26.0 3.4 118 im-1 18.0 10 40 2.5 23.0 3.8 112 im-1 22.0 10 45 2.5 20.0 4.3 105 im-1 27.0 10 45 2.5 17.0 4.7 100 im-1 33.0 10 45 2.5 15.0 5.2 95 im-1 39.0 10 45 2.5 13.5 6.8 83.5 im-1 47.0 10 45 2.5 12.5 8.2 76 im-1 56.0 10 45 2.5 11.5 10.0 69 im-1 68.0 10 45 2.5 10.5 11.5 64 im-1 82.0 10 45 2.5 10.0 16.0 54.5 im-1 100.0 10 45 2.5 9.5 17.5 52 im-2 0.022 10 50 50.0 900.0 0.025 2400 phenolic core im-2 0.027 20 40 25.0 875.0 0.03 2200 im-2 0.033 10 40 25.0 850.0 0.035 2000 im-2 0.039 10 40 25.0 825.0 0.04 1900 im-2 0.047 10 40 25.0 800.0 0.045 1800 im-2 0.056 10 40 25.0 775.0 0.05 1700 im-2 0.068 10 40 25.0 750.0 0.06 1500 im-2 0.082 10 40 25.0 725.0 0.07 1400 im-2 0.10 10 40 25.0 680.0 0.08 1350 im-2 0.12 10 40 25.0 640.0 0.09 1270 im-2 0.15 10 38 25.0 600.0 0.10 1200 im-2 0.18 10 35 25.0 550.0 0.12 1105 im-2 0.22 10 33 25.0 510.0 0.14 1025 im-2 0.27 10 33 25.0 430.0 0.16 960 im-2 0.33 10 30 25.0 410.0 0.22 815 im-2 0.39 10 30 25.0 365.0 0.30 700 im-2 0.47 10 30 25.0 330.0 0.35 650 im-2 0.56 10 30 25.0 300.0 0.50 545 im-2 0.68 10 28 25.0 275.0 0.60 495 im-2 0.82 10 28 25.0 250.0 0.85 415 im-2 1.0 10 25 25.0 230.0 1.0 385 notes (1) measured with full length lead (2) rated dc current based on maximum temperature rise as shown in table
document number: 34030 for tec hnical questions, contact: magnetics@vishay.com www.vishay.com revision: 08-jul-09 3 im inductors, commercial, molded, axial leaded vishay dale im-2 1.2 10 25 7.9 150.0 0.18 590 iron core im-2 1.5 10 28 7.9 140.0 0.22 535 im-2 1.8 10 30 7.9 125.0 0.30 455 im-2 2.2 10 30 7.9 115.0 0.40 395 im-2 2.7 10 37 7.9 100.0 0.55 355 im-2 3.3 10 45 7.9 90.0 0.85 270 im-2 3.9 10 45 7.9 80.0 1.0 250 im-2 4.7 10 45 7.9 75.0 1.2 230 im-2 5.6 10 50 7.9 65.0 1.8 185 im-2 6.8 10 50 7.9 60.0 2.0 175 im-2 8.2 10 55 7.9 55.0 2.7 155 im-2 10.0 10 55 7.9 50.0 3.7 130 im-2 12.0 10 45 2.5 40.0 2.7 155 im-2 15.0 10 40 2.5 35.0 2.8 150 im-2 18.0 10 50 2.5 30.0 3.1 145 im-2 22.0 10 50 2.5 25.0 3.3 140 im-2 27.0 10 50 2.5 20.0 3.5 135 im-2 33.0 10 45 2.5 24.0 3.4 130 ferrite core im-2 39.0 10 45 2.5 22.0 3.6 125 im-2 47.0 10 45 2.5 20.0 4.5 110 im-2 56.0 10 45 2.5 18.0 5.7 100 im-2 68.0 10 50 2.5 15.0 6.7 92 im-2 82.0 10 50 2.5 14.0 7.3 88 im-2 100.0 10 50 2.5 13.0 8 84 im-2 120.0 10 30 0.79 12.0 13 66 im-2 150.0 10 30 0.79 11.0 15 61 im-2 180.0 10 30 0.79 10.0 17 57 im-2 220.0 10 30 0.79 9.0 21 52 im-2 270.0 10 30 0.79 8.0 25 47 im-2 330.0 10 30 0.79 7.0 28 45 im-2 390.0 10 30 0.79 6.5 35 40 im-2 470.0 10 30 0.79 6.0 42 36 im-2 560.0 10 30 0.79 5.0 46 35 im-2 680.0 10 30 0.79 4.0 60 30 im-2 820.0 10 30 0.79 3.8 65 29 im-2 1000.0 10 30 0.79 3.4 72 28 im-4 0.15 20 50 25 525.0 0.03 2450 phenolic core im-4 0.22 20 50 25 450.0 0.055 1810 im-4 0.33 20 45 25 360.0 0.09 1400 im-4 0.47 20 45 25 310.0 0.12 1225 im-4 0.56 10 50 25 280.0 0.135 1150 im-4 0.68 10 50 25 250.0 0.15 1100 im-4 0.82 10 50 25 220.0 0.22 900 im-4 1.0 10 50 25 200.0 0.29 785 im-4 1.2 10 33 7.9 180.0 0.42 650 im-4 1.5 10 33 7.9 160.0 0.50 600 im-4 1.8 10 33 7.9 150.0 0.65 525 im-4 2.2 10 33 7.9 135.0 0.95 435 im-4 2.7 10 33 7.9 120.0 1.20 385 im-4 3.3 10 33 7.9 110.0 2.0 300 im-4 3.9 10 33 7.9 100.0 2.30 280 im-4 4.7 10 33 7.9 90.0 2.60 260 im-4 5.6 10 45 7.9 60.0 0.32 495 iron core im-4 6.8 10 50 7.9 55.0 0.50 395 im-4 8.2 10 50 7.9 50.0 0.60 360 im-4 10.0 10 55 7.9 45.0 0.90 290 im-4 12.0 10 65 2.5 42.0 1.10 265 im-4 15.0 10 65 2.5 40.0 1.40 240 standard electrical specifications model ind. (h) tol. (%) q min. test frequency q (mhz) srf min. (mhz) (1) dcr max. ( ) rated dc current (ma) (2) notes (1) measured with full length lead (2) rated dc current based on maximum te mperature rise as shown in table
www.vishay.com for technical questions, contact: magnetics@vishay.com document number: 34030 4 revision: 08-jul-09 im vishay dale inductors, commercial, molded, axial leaded im-4 18.0 10 75 2.5 34.0 2.25 185 iron core im-4 22.0 10 75 2.5 30.0 2.50 175 im-4 27.0 10 60 2.5 25.0 2.60 170 im-4 33.0 10 65 2.5 19.0 3.0 165 im-4 36.0 5 60 2.5 15.5 2.50 180 im-4 39.0 5 60 2.5 14.5 2.60 176 im-4 43.0 5 60 2.5 13.7 2.70 172 im-4 47.0 5 55 2.5 13.0 2.75 170 im-4 51.0 5 55 2.5 12.7 2.85 167 im-4 56.0 5 55 2.5 12.0 3.00 164 im-4 62.0 5 55 2.5 11.5 3.15 160 im-4 68.0 5 55 2.5 11.0 3.30 156 im-4 75.0 5 55 2.5 10.5 3.70 147 im-4 82.0 5 50 2.5 10.3 3.90 143 im-4 91.0 5 50 2.5 10.0 4.30 136 im-4 100.0 5 50 2.5 9.5 4.50 133 im-4 110.0 5 60 0.79 8.9 4.90 128 im-4 120.0 5 65 0.79 8.7 5.20 124 im-4 130.0 5 65 0.79 8.5 5.45 121 im-4 150.0 5 65 0.79 8.0 6.05 114 im-4 160.0 5 65 0.79 7.5 6.40 111 im-4 180.0 5 65 0.79 7.0 6.75 108 im-4 200.0 5 65 0.79 6.5 7.10 106 im-4 220.0 5 65 0.79 6.2 7.45 103 im-4 240.0 5 65 0.79 5.9 7.80 101 im-4 270.0 5 65 0.79 5.7 11.0 129 im-4 300.0 5 65 0.79 5.4 11.5 125 im-4 330.0 5 65 0.79 5.1 12.0 123 im-4 360.0 5 65 0.79 4.8 15.5 108 im-4 390.0 5 65 0.79 4.5 16.3 105 im-4 430.0 5 65 0.79 4.2 17.1 102 im-4 470.0 5 65 0.79 3.9 17.9 100 im-4 510.0 5 65 0.79 3.7 18.8 98 im-4 560.0 5 65 0.79 3.5 24.7 85 im-4 620.0 5 65 0.79 3.3 25.9 83 im-4 680.0 5 55 0.79 3.1 27.2 81 im-4 750.0 5 55 0.79 2.9 28.6 79 im-4 820.0 5 55 0.79 2.7 30.0 77 im-4 910.0 5 55 0.79 2.5 31.5 76 im-4 1000.0 5 55 0.79 2.3 33.1 74 im-4 1100.0 5 30 0.25 2.1 43.5 64 im-4 1200.0 5 30 0.25 2.0 45.7 63 im-4 1300.0 5 30 0.25 1.9 49.0 61 im-4 1500.0 5 30 0.25 1.8 52.5 59 im-4 1600.0 5 30 0.25 1.7 54.0 58 im-4 1800.0 5 30 0.25 1.6 56.7 56 im-6 0.10 20 55 25.0 510.0 0.020 3600 phenolic core im-6 0.12 20 55 25.0 510.0 0.025 3300 im-6 0.15 20 55 25.0 510.0 0.030 3000 im-6 0.18 20 55 25.0 450.0 0.030 2900 im-6 0.22 20 50 25.0 415.0 0.035 2800 im-6 0.27 20 50 25.0 380.0 0.050 2400 im-6 0.33 20 50 25.0 350.0 0.065 2000 im-6 0.39 20 50 25.0 320.0 0.080 1800 im-6 0.47 20 50 25.0 300.0 0.085 1700 im-6 0.56 10 50 25.0 270.0 0.125 1450 standard electrical specifications model ind. (h) tol. (%) q min. test frequency q (mhz) srf min. (mhz) (1) dcr max. ( ) rated dc current (ma) (2) notes (1) measured with full length lead (2) rated dc current based on maximum temperature rise as shown in table
document number: 34030 for tec hnical questions, contact: magnetics@vishay.com www.vishay.com revision: 08-jul-09 5 im inductors, commercial, molded, axial leaded vishay dale im-6 0.68 10 45 25.0 250.0 0.150 1300 phenolic core im-6 0.82 10 40 25.0 210.0 0.205 1100 im-6 1.0 10 40 25.0 200.0 0.290 930 im-6 1.2 10 30 7.9 180.0 0.400 785 im-6 1.5 10 30 7.9 170.0 0.485 700 im-6 1.8 10 30 7.9 150.0 0.740 580 im-6 2.2 10 30 7.9 140.0 0.970 505 im-6 2.7 10 30 7.9 120.0 1.20 460 im-6 3.3 10 30 7.9 70.0 0.140 990 iron core im-6 3.9 10 30 7.9 65.0 0.155 870 im-6 4.7 10 30 7.9 60.0 0.210 745 im-6 5.6 10 30 7.9 50.0 0.280 645 im-6 6.8 10 30 7.9 50.0 0.375 560 im-6 8.2 10 30 7.9 48.0 0.440 540 im-6 10.0 10 30 7.9 42.0 0.605 440 im-6 12.0 10 50 2.5 36.0 1.05 370 im-6 15.0 10 55 2.5 30.0 1.20 310 im-6 18.0 10 60 2.5 30.0 1.95 255 im-6 22.0 10 60 2.5 24.0 2.20 240 im-6 27.0 10 65 2.5 22.0 2.75 205 im-6 33.0 10 75 2.5 20.0 3.5 185 im-6 39.0 10 75 2.5 18.0 3.8 176 im-6 47.0 10 75 2.5 16.0 4.0 170 im-6 56.0 10 75 2.5 15.0 4.4 164 im-6 68.0 10 75 2.5 12.0 4.7 156 im-6 82.0 10 75 2.5 10.0 5.3 143 im-6 100.0 10 65 2.5 8.0 6.0 133 im-6 120.0 10 65 0.79 6.0 5.0 124 im-6 150.0 10 65 0.79 5.4 5.8 118 im-6 180.0 10 65 0.79 5.0 6.6 114 im-6 220.0 10 65 0.79 4.7 7.4 112 im-6 270.0 5 65 0.79 5.6 8.2 110 im-6 300.0 5 65 0.79 5.3 8.7 107 im-6 330.0 5 65 0.79 5.0 9.1 105 im-6 360.0 5 65 0.79 4.7 9.6 102 im-6 390.0 5 65 0.79 4.5 10.0 100 im-6 430.0 5 65 0.79 4.3 10.6 97 im-6 470.0 5 65 0.79 4.0 11.1 95 im-6 510.0 5 65 0.79 3.8 11.6 93 im-6 560.0 5 65 0.79 3.6 12.3 91 im-6 620.0 5 60 0.79 3.5 13.0 88 im-6 680.0 5 60 0.79 3.4 13.7 85 im-6 750.0 5 60 0.79 3.3 14.4 83 im-6 820.0 5 60 0.79 3.1 15.1 81 im-6 910.0 5 60 0.79 2.9 15.8 79 im-6 1000.0 5 60 0.79 2.8 16.5 78 im-8 1100.0 5 60 0.25 2.8 21.0 78 iron core im-8 1200.0 5 60 0.25 2.7 22.0 76 im-8 1300.0 5 60 0.25 2.6 23.0 75 im-8 1500.0 5 65 0.25 2.4 25.0 72 im-8 1600.0 5 65 0.25 2.3 26.0 70 im-8 1800.0 5 65 0.25 2.2 28.0 68 im-8 2000.0 5 65 0.25 2.1 29.0 67 standard electrical specifications model ind. (h) tol. (%) q min. test frequency q (mhz) srf min. (mhz) (1) dcr max. ( ) rated dc current (ma) (2) notes (1) measured with full length lead (2) rated dc current based on maximum te mperature rise as shown in table
www.vishay.com for technical questions, contact: magnetics@vishay.com document number: 34030 6 revision: 08-jul-09 im vishay dale inductors, commercial, molded, axial leaded im-8 2200.0 5 70 0.25 2.0 30.0 66 iron core im-8 2400.0 5 70 0.25 1.9 31.0 64 im-8 2700.0 5 70 0.25 1.8 33.0 62 im-8 3000.0 5 70 0.25 1.7 35.0 61 im-8 3300.0 5 70 0.25 1.6 38.0 58 im-8 3600.0 5 70 0.25 1.5 40.0 57 im-9 68.0 10 70 2.5 13.0 3.3 168 iron core im-9 82.0 10 65 2.5 11.7 3.5 162 im-9 100.0 10 65 2.5 10.7 3.8 155 im-9 120.0 10 75 0.79 9.3 4.7 142 im-9 150.0 10 75 0.79 8.3 5.3 132 im-10 3900.0 5 80 0.25 1.45 44.0 61 iron core im-10 4300.0 5 80 0.25 1.40 46.0 59 im-10 4700.0 5 80 0.25 1.35 48.0 58 im-10 5000.0 5 80 0.25 1.30 50.0 57 im-10 5600.0 5 80 0.25 1.25 53.0 56 im-10 6200.0 5 80 0.25 1.20 56.0 54 im-10 6800.0 5 80 0.25 1.15 59.0 52 im-10 7500.0 5 80 0.25 1.10 62.0 51 im-10 8200.0 5 80 0.25 1.05 65.0 50 im-10 9100.0 5 80 0.25 1.00 68.0 49 im-10 10 000.0 5 80 0.25 0.95 72.0 47 ordering information im-2 10 h 10 % er e2 model inductance value inductance tolerance package code jedec lead (pb)-free standard global part number im02 er 100 k model package code inductance value inductance tolerance standard electrical specifications model ind. (h) tol. (%) q min. test frequency q (mhz) srf min. (mhz) (1) dcr max. ( ) rated dc current (ma) (2) notes (1) measured with full length lead (2) rated dc current based on maximum temperature rise as shown in table
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
